HeartbeatWithBadTag.seq - HEARTBEAT chunk is received with invalid Verification Tag
To check that if HEARTBEAT chunk is received with invalid Verification
Tag, the endpoint should silently discard the packet.
./HeartbeatWithBadTag.seq [-tooloption ...] -pkt ./HeartbeatWithBadTag.def
-tooloption : v6eval tool option
See Also: ../common/STD_PKT_COMMON.def
../common/SCTP_COMMON.def
Association is established between endpoint A and B. Arrange data
in endpoint A such that HEARTBEAT chunk with invalid Verification
Tag is sent to endpoint B.
Endpoint A Endpoint B ULP
(ESTABLISHED) (ESTABLISHED)
HEARTBEAT -----------------> Silently discard
(with invalid Verification Tag)
HEARTBEAT ----------------->
<----------------- HEARTBEAT-ACK
TEST DESCRIPTION:
1. Send HEARTBEAT message with invalid verification tag value
to endpoint B.
Record the message sequence using a signal emulator.
2. Check A: HEARTBEAT message is silently discarded.
3. Check B: Was the message sequence as above.
None
RFC 4960
8.5. Verification Tag
The Verification Tag rules defined in this section apply when sending
or receiving SCTP packets that do not contain an INIT, SHUTDOWN
COMPLETE, COOKIE ECHO (see Section 5.1), ABORT, or SHUTDOWN ACK
chunk. The rules for sending and receiving SCTP packets containing
one of these chunk types are discussed separately in Section 8.5.1.
When sending an SCTP packet, the endpoint MUST fill in the
Verification Tag field of the outbound packet with the tag value in
the Initiate Tag parameter of the INIT or INIT ACK received from its
peer.
When receiving an SCTP packet, the endpoint MUST ensure that the
value in the Verification Tag field of the received SCTP packet
matches its own tag. If the received Verification Tag value does not
match the receiver's own tag value, the receiver shall silently
discard the packet and shall not process it any further except for
those cases listed in Section 8.5.1 below.