Test Information

TitleUnrecognized Parameter Type with higher two bytes are set to 10
CommandLine./ParameterTypeActionA10.seq -pkt ./ParameterTypeActionA10.def -log 8.html -ti Unrecognized Parameter Type with higher two bytes are set to 10
TestVersionREL_1_0_0
ToolVersionREL_3_1_0
Start2009/02/13 13:30:07
Tn.//../etc//tn.def
Nu.//../etc//nut.def
Pkt./ParameterTypeActionA10.def
Systemlinux-v6
TargetNameRHEL5GA
HostNameFNST
TypeIPv4

Test Sequence Execution Log

13:30:08Start
13:30:08Start Capturing Packets (Link0)

=============== sctpCheckEnv ===============
13:30:08 vRemote(rcommand.rmt) ``/usr/local/v6eval//bin/linux-v6//rcommand.rmt -t linux-v6 -u root -p goodluck -d ttyS0 -o 1 cmd="killall -9 sctp_test ; killall -9 sctp_darn ; killall -9 sctp_status; checksctp" ''
Connected.

[root@RHEL ~]# 
[root@RHEL ~]# killall -9 sctp_test ; killall -9 sctp_darn ; killall -9 sctp_sta tus; checksctp 
[1]+  Killed                  sctp_test -H 192.168.0.21 -P 4506 -T -l -x 1 -X 1 > /tmp/tstcmd.log 2>&1
sctp_darn: no process killed
sctp_status: no process killed
SCTP supported
[root@RHEL ~]# sendMessagesSync: never got killall -9 sctp_test ; killall -9 sctp_darn ; killall -9 sctp_status; checksctp 
echo $?
0~.
Disconnected.

============== sctpPingToHost ==============
13:30:17 vSend(Link0,echo4_request_on_link0)
Send Echo Request on Link0
13:30:17 vRecv(Link0,echo4_reply_on_link0 arp_request_on_link0) timeout:5 cntLimit:0 seektime:0
Recv ARP Request on Link0
13:30:18 vSend(Link0,arp_reply_on_link0)
Send ARP Reply on Link0
13:30:18 vRecv(Link0,echo4_reply_on_link0) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 13:30:10
recv unexpect packet at 13:30:11
recv unexpect packet at 13:30:17
Recv Echo Reply on Link0

============== sctpStartServer =============
13:30:18 vRemote(rcommandasync.rmt) ``/usr/local/v6eval//bin/linux-v6//rcommandasync.rmt -t linux-v6 -u root -p goodluck -d ttyS0 -o 1 cmd="sctp_test -H 192.168.0.21 -P 4507 -T -l -x 1 -X 1 > /tmp/tstcmd.log 2>&1 &" ''
Connected.

[root@RHEL ~]# 
[root@RHEL ~]# sctp_t~.
Disconnected.

================ Main Test =================
13:30:22 vSend(Link0,sctp_chunk_init_param_10)
Send SCTP CHUNK_INIT (with unrecognized paramter type which higher two bytes are set to 10)
13:30:22 vRecv(Link0,sctp_chunk_abort arp_request_on_link0 ) timeout:10 cntLimit:0 seektime:0
Recv SCTP CHUNK_ABORT (with Unresolvable Address)

OK
13:30:22End

Packet Reverse Log