Test Information

TitleABORT chunk is received from an address with which endpoint has no association
CommandLine./OOTB_AbortChunk.seq -pkt ./OOTB_AbortChunk.def -log 10.html -ti ABORT chunk is received from an address with which endpoint has no association
TestVersionREL_1_0_0
ToolVersionREL_3_1_0
Start2009/02/12 16:09:21
Tn.//../etc//tn.def
Nu.//../etc//nut.def
Pkt./OOTB_AbortChunk.def
Systemlinux-v6
TargetNameRHEL5GA
HostNameFNST
TypeIPv6

Test Sequence Execution Log

16:09:22Start
16:09:22Start Capturing Packets (Link0)

=============== sctpCheckEnv ===============
16:09:22 vRemote(rcommand.rmt) ``/usr/local/v6eval//bin/linux-v6//rcommand.rmt -t linux-v6 -u root -p goodluck -d ttyS0 -o 1 cmd="killall -9 sctp_test ; killall -9 sctp_darn ; killall -9 sctp_status; checksctp" ''
Connected.

[root@RHEL ~]# 
[root@RHEL ~]# killall -9 sctp_test ; killall -9 sctp_darn ; killall -9 sctp_sta tus; checksctp 
[1]+  Killed                  sctp_test -H 3ffe:501:ffff:100:020c:29ff:fe0f:1734 -P 4062 -T -l -x 1 -X 1 > /tmp/tstcmd.log 2>&1
sctp_darn: no process killed
sctp_status: no process killed
SCTP supported
[root@RHEL ~]# sendMessagesSync: never got killall -9 sctp_test ; killall -9 sctp_darn ; killall -9 sctp_status; checksctp 
echo $?
0
[root@RH~.
Disconnected.

============= sctpPing6ToHost ==============
16:09:31 vSend(Link0,echo_request_on_link0)
Send Echo Request on Link0
16:09:31 vRecv(Link0,echo_reply_on_link0 ns_on_link0 ns_on_link0_gl) timeout:5 cntLimit:0 seektime:0
recv unexpect packet at 16:09:30
recv unexpect packet at 16:09:30
Recv Echo Reply on Link0

================ Main Test =================
16:09:32 vSend(Link0,sctp_chunk_abort_ootb0)
Send SCTP CHUNK_ABORT (OOTB Packet, T bit set to 0)
16:09:32 vRecv(Link0,sctp_chunk_any_rcv ns_on_link0 ns_on_link0_gl) timeout:5 cntLimit:0 seektime:0
vRecv() return status=1
16:09:37 vSend(Link0,sctp_chunk_abort_ootb1)
Send SCTP CHUNK_ABORT (OOTB Packet, T bit set to 1)
16:09:37 vRecv(Link0,sctp_chunk_any_rcv ns_on_link0 ns_on_link0_gl) timeout:5 cntLimit:0 seektime:0
vRecv() return status=1

OK
16:09:42End

Packet Reverse Log